• 1993-2000 Honda Civic rear disc w/o ABS

This pair of CNC laser-cut and zinc coated (made in the USA) steel brackets are used to convert most non-ABS drum-brake equipped 1993-2000 Honda Civic rear axle to disc.  This setup seriously simplifies the popular Integra disc swap - You do NOT need to remove or change out your existing swing arms or spindles - so no extensive wrestling with rusty/seized bolts.  We specify all 1997 Acura Integra pieces: it has smaller 4 lug rear rotors and calipers with the integral parking brake along with the hoses, master cylinder, combination valve and e-brake cables.  These are as near as your closest Honda dealer, NAPA or other parts house.    These brackets are designed to work with the stock drum spindles as shown here:

      This listing is for the "CIV" spindle only!

Note the heavy scalloping with the deeper "CIV" spindle.  Check the chart below to verify that you have the CIV spindle, if not - check our 1984-97 listing to see if your car falls there.  The non-ABBS CIV spindle will have the scalloping but with the large dust shield like a HON.

Your existing trailing arm MUST be the all stamped steel piece, not the bolted up forged/stamped piece (earlier design).  This will NOT work with the AWD WagoVan, so don't ask...

Items supplied are 2 zinc-coated brackets, and 12 attaching bolts. 
We strongly recommend changing to a Integra rear disc master cylinder and proportioning block when doing this changeover.  Customer is responsible for verifying spindle type.  A customer did a nice tech writeup here.
We also do not ship outside the US market as Asian/European spec cars are different - sorry Canada...


"CIV" spindle

1993-2000 Honda Civic rear disc w/o ABS

  • Product Code: CIV non ABS
  • Availability: In Stock
  • $79.99